Worm and Worm Wheel, Circular Arc Tooth Cylindrical Worm Reducer, Gearbox, Gear Case.

• Customization: Available
• Application: Machinery
• Hardness: Soft Tooth Surface
• Model NO.: WHS
• Installation: 90 Degree
• Layout: Worm-Gear
• Gear Shape: Cylindrical Gear
• Step: Single-Step
• Type: Planetary Gear Reducer
• Gear Ratio: 8-60
• Customized or Not: Be
• Self-Locking or Not: Be
• Power (Output): 3kw
• Transport Package: Crate
• Specification: 300
• Trademark: Kingmai
• Origin: Shandong, China
• Production Capacity: 50, 000 Units

Product Description

Characteristics of Worm Gear Reducer

The main features of worm gear reducer include large reduction ratio, smooth transmission, low noise, long service life and so on. Its wide range of reduction ratios, generally up to 10-1000, can meet the needs of different transmission ratios. At the same time, its transmission is smooth, and the vibration and impact generated during operation are small, which has less impact on mechanical equipment. In addition, the worm gear reducer has low noise, stable operation, long service life and simple maintenance, so it is widely used.

Product Parameters

 

Model Size	A	L	L1	L2	L3	L4	H	H1	B	B1	C	C1	d	d1(gc1)	d2(gc1)	b	b1	t	t1	l1	l2	Weight/kg
WHX120	120	250	240	145	229.5	136.5	120	394	275	260	215	220	M16	35	55	10	16	38.5	61.2	60	82	89~94
WHX125	125	235	235	145	225	134	125	400	270	270	210	230	M16	35	55	10	16	37.8	58.5	58	82	83~103
WHX150	150	300	280	165	270.5	153.5	150	483.5	320	300	250	250	M20	40	60	12	18	43.5	66.8	70	102	136~150
WHX160	160	290	290	165	265	154	160	505	330	310	250	260	M20	40	65	12	18	42.8	68.9	82	105	140~157
WHX180	180	375	295	180	324	169	180	574	385	335	305	285	M20	45	70	14	20	49	77.2	70	102	210~230
WHX200	200	360	345	195	365	184	200	628	430	360	330	310	M20	50	80	16	24	53.5	85	82	130	290~316
WHX210	210	420	335	200	358.5	194	200	654	440	385	350	325	M24	50	80	16	24	55	88.7	90	112	280~340
WHX250	250	430	370	220	422	214	220	748	510	420	410	360	M24	60	90	18	24	65.5	98.7	110	122	400~440
WHX280	280	485	430	245	485	233	250	838	610	470	480	400	M24	60	100	18	28	63.9	105.7	105	165	535~600
WHX300	300	580	410	250	505	242	260	900.5	620	480	510	410	M30	70	100	20	28	76	110	130	138	598~695
WHX320	320	525	455	265	525	256	280	953	880	520	550	440	M30	70	110	20	32	74.2	116.5	105	165	725~810
WHX360	360	668	480	270	560	267	300	1055	740	530	620	460	M30	80	120	24	32	87	131.2	160	178	854~944
WHX400	400	630	525	300	605	291	320	1155	820	610	660	520	M30	80	130	24	36	85	137.2	130	200	1320~1470
WHX420	420	745	535	310	640	299	340	1215.5	850	585	740	515	M30	90	130	24	36	97	142.3	160	198	1350~1500
WHX450	450	680	560	325	670	319	355	1296	910	670	730	570	M36	80	150	24	40	85	158.5	130	200	1670~1860
WHX500	500	730	625	355	725	343	400	1435	1000	730	810	620	M36	90	170	24	40	95	178.5	130	240	2160~2410

Second, the working principle of worm gear reducer
The working principle of worm gear reducer is to utilize the friction transmission between worm gear and worm wheel to realize the deceleration. The worm is a helical rod, and the worm gear is a gear with helical teeth. When the worm rotates, its helical teeth mesh with the helical teeth of the worm wheel, thus rotating the worm wheel. Since the number of teeth of the worm and the worm wheel are different, the speed of rotation of the worm wheel will be lower than the speed of rotation of the worm, thus realizing the effect of deceleration.

1. Installation Steps for Worm Gear Reducers
2. . Select the installation location: make sure that the installation location is dry, clean, and well ventilated, and take into account the convenience of maintenance and safety factors.
3. . Mounting foundation: place the reducer on the mounting foundation, check for leveling using a level, and make necessary adjustments.
4. . Axis alignment: Make sure that the input shaft of the reducer and the output shaft of the drive equipment maintain coaxiality to avoid wear and tear caused by axis misalignment.
5. . Connecting the motor: connect the gearhead to the motor and make sure the connection is tight and firm.
6. . Adjustment of position: adjust the position of the reducer to make it harmonize with other equipment.
7. . Test run: after the installation is completed, carry out a test run to check whether the reducer is running normally, whether there is abnormal noise and excessive high temperature.
8. 

Q: Can you make the gearbox with customization?
A: Yes, we can customize per your request, like flange, shaft, configuration, material, etc
Q: Do you provide samples?
A: Yes.A sample is available for testing.
Q: What's your lead time?
A: Standard products need 5-30 days, a bit longer for customized products.
Q: Do you provide technology support?
A: Yes. Our company has a design and development team, we can provide technology support if youneed.
Q: How to ship to us?
A: lt is available by air. by sea. or by train.
Q: How to pay the money?
A: T/T and L/C are preferred, with a different currency, including USD, EUR. RMB. etc
Q: How can l know if the product is suitable for me?
A: > 1st confirm drawing and specification >2nd test sample >3rd start mass production
Q: Can l come to your company to visit?
A: Yes, you are welcome to visit us at any time.
A: You can send an inguiry directly, and we will respond within 12 hours